Gradually getting somewhere with the Seabee.
I butchered the holes in the wing to allow the wing to fit accurately,
then re-packed them with epoxy putty. When that cures I'll probably add a
1/32" ply facing plate for cosmetic purposes only.
Then only the belly-pan and cowl will remain to be done! :-)
Plus trim'n'balance. :-/
Then crap yourself while your test-pilot tries to destroy the aircraft in
flight by over-stressing everything, just to see if you screwed up when
you put it together... :-(
---
■ Synchronet ■ Made of wood and glue, but mostly glue!
|
